Journal

  • International Journal

    • DaeK. Choi, Sang H. Lee, “Design and fabrication of a novel flowmeter with corrugated structure,” Microelectronic Engineering, Vol. 98, pp. 477-482, 2012
    • Dae K. Choi, Sang H. Lee, “Deposition Property Investigation of Focused Ion Beam for High-Aspect-Ratio Metal Tip,” Microsystem technologies, Article in press, http://dx.doi.org/10.1007/s00542-012-1616-8, 2012
    • Sang H. Lee, Geunbae Lim, Wonkyu Moon, Hyunjung Shin, and Cheong-Wol Kim, 
      “V-Shaped Metal-Oxide- Semiconductor Transistor Probe with Nano Tip for Surface Electric Properties,” 
      Ultramicroscopy, Vol. 108, pp. 1094-1100, 2008
    • Sang H. Lee, Geunbae Lim, and Wonkyu Moon, “A Novel SPM Probe with MOS Transistor and Nano Tip for Surface Electric Properties,” Journal of Physics: Conference Series, Vol. 61, pp. 678-682, 2007
    • Kyungnam Han, Sang Hoon Lee, Wonkyu Moon, Joonshik Park, and Chanwoo Moon, “Design and Fabriction of the 
      Micro-gripper for Manipulating the Cell,” Integrated Ferroelectrics, Vol. 89, No. 1, pp. 77-86, 2007
    • Sang H. Lee, Pan K. Kim, Wonkyu Moon, and Geunbae Lim, “Fabrication and characterization of 3-Dimensional MOS transistor tip integrated micro cantilever,” Microsystem Technologies, Vol. 13, No. 5-6, pp. 579-587, 2007
    • Sang H. Lee, Hyun-Wook Kang, Dong-Woo Cho, and Wonkyu Moon, “Study on the method for the reliability test of
      focused ion beam,” Microsystem Technologies, Vol. 13, No. 5-6, pp. 569-577, 2007
    • S. H. Oh, S. H. Lee, J. C. Jeon, M. H. Kim and S. S. Lee, “Bulk-micromachined circular foil type micro heat-flux sensor,” Sensors and Actuators A, Vol. 132, Issue 2, pp. 581-586, 2006
    • Sang H. Lee, Seung S. Lee, J.-J Choi, Jong U. Jeon, and K. Ro, “Fabrication of a ZnO piezoelectric micro cantilever 
      with a high-aspect-ratio nano tip,” Microsystem Technologies, Vol. 11, No. 6, pp. 416-423, 2005
    • Sang H. Lee, Seung S. Lee, J.-J Choi, Jong U.Jeon, and K. Ro, “Fabrication of a high-aspect-ratio nano tip integrated micro cantilever with a ZnO piezoelectric actuator,” Key Engineering Materials, Vol. 270-273, pp. 1095-1100, 2004
    • Sang H. Lee, Kwang-Cheol Lee, Seung S. Lee, and Hyeon-Seok Oh, “Fabrication of an electrothermally actuated electrostatic microgripper,” International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 3, pp. 789-793, 2002

  • Domestic Journal

    • 최대근, 이상훈, “주름 구조를 이용한 저속 유속센서 개발,” 한국센서학회지, Vol.20, No. 6, pp.393-399, 2011
    • 이상훈, 김호경, “기계적 프레스 접합의 공정 및 강도평가,” 한국안전학회지, Vol. 26, No. 4, pp. 1-6, 2011
    • 이상훈, 김호경, “유한요소법을 이용한 철도 차륜에서 구름 접촉으로 인한 피로손상 평가, Vol 26, No, 3, pp. 1-7, 2011

최근 글

최근 댓글

    글 목록

    카테고리